Dell Force10 S2410-01-10GE-24P - Page 270

270 | Layer 3 Routing
www.dell.com | support.dell.com
Figure 17-253. Inspecting a Layer 3 LAG Configuration
R1 (Config)#exit
R1 #show interfaces port-channel brief
LAG Status Ports
--- ------ -------
10 Down 1/0/10 (Down)
1/0/11 (Down)
R1 #show ip interface ?
<unit/slot/port> Enter interface in unit/slot/port format.
vlan Display information about IP configuration settings for a Vlan.
brief Display summary information about IP configuration
settings for all ports.
R1 #show ip interface vlan 100
Primary IP Address............................. 100.0.0.1/30
Routing Mode................................... Enable
Administrative Mode............................ Enable
Forward Net Directed Broadcasts................ Disable
Proxy ARP...................................... Enable
Active State................................... Inactive
Link Speed Data Rate........................... Inactive
MAC Address.................................... 00:01:E8:D5:A1:52
Encapsulation Type............................. Ethernet
IP MTU......................................... 1500
R1 #show vlan id 100