Table 37. System setup options—System Management menu (continued)
System Management
Set Ownership Date Enables to set the ownership date.
Default: OFF
Diagnostics
OS Agent Requests Enables or disables scheduling of onboard diagnostics on the subsequent boot.
Default: ON
Power-on-Self-Test Automatic
Recovery
Enables or disables automatic recovery if the computer is unresponsive after
the BIOS Power-on-Self Test.
Default: ON
Table 38. System setup options—Keyboard menu
Keyboard
Fn Lock Options Enables or disables the Fn lock options.
Default: ON
Lock Mode Enables or disables the Function keys to have secondary functions.
By default, the Lock Mode Secondary option is enabled. With this option, the
F1-F12 keys scan the code for their secondary functions.
Keyboard Illumination Configures the keyboard illumination settings.
By default, the Bright option is enabled.
Keyboard Backlight Timeout on AC Sets the timeout value for the keyboard backlight when an AC adapter is
connected to the system.
By default, the 1 minute option is enabled.
Keyboard Backlight Timeout on
Battery
Sets the timeout value for the keyboard backlight when the computer is
running only on battery power.
By default, the 1 minute option is enabled.
Table 39. System setup options—Pre-boot Behavior menu
Pre-boot Behavior
Adapter Warnings
Enable Adapter Warnings Enables or disables the warning messages during boot when the adapters with
less power capacity are detected.
Default: ON
Warning and Errors Sets the action to be taken when a warning or error is encountered.
By default, the Prompt on Warnings and Errors option is enabled.
USB-C Warnings Enables or disables dock warning messages.
Default: ON
Fastboot Allows you to configure the speed of the UEFI boot process.
By default, the Thorough option is enabled.
Extend BIOS POST Time Set the BIOS POST load time.
By default, the 0 seconds option is enabled.
90 BIOS setup
To Next Page
Loading...
