Security
• By default, support for TLS 1.1 and higher is enabled. You can select TLS 1.0 and higher, TLS 1.1 and higher, or TLS 1.2 only.
See Note 2 in the Important Notes section.
• OpenSSL upgrade See Note 3 in the Important Notes section.
• Downgrading CMC firmware using shared update from iDRAC is not allowed when FIPS is enabled in CMC.
Storage and PERC
N/A
Support Assist and parts replacement
N/A
Updates
• Support for riser configuration for Dell PowerEdge R730xd with an Intel Xeon E5-2600 v4 family processor installed.
• Support for Server Configuration Profile (SCP) via Redfish Interface.
SCP Import, Export, and Preview are supported.
11
To Next Page
Loading...
