Need help?Do you have a question about the Dell EMC PowerEdge VRTX and is the answer not in the manual?
Details preparation steps, hardware setup, and basic network connection for CMC.
Steps for initial access and configuring CMC network interfaces and protocols.
Steps to access and log into the CMC using the web interface.
Details various methods for user authentication and login.
Procedures for changing default passwords and managing login security.
How to download firmware and view installed versions.
Procedures for updating CMC and chassis infrastructure firmware.
Steps for updating server iDRAC and other component firmware.
Configuring network settings, IP addresses, and DNS via web or RACADM.
Configuring slot names and iDRAC network settings for servers.
Adding local users and integrating with Active Directory for authentication.
Explains redundancy policies (Grid, PSU) and Dynamic Power Supply Engagement.
Resetting administrative password and collecting system data using RACDUMP.
Diagnosing power issues and interpreting event logs.
Details preparation steps, hardware setup, and basic network connection for CMC.
Steps for initial access and configuring CMC network interfaces and protocols.
Steps to access and log into the CMC using the web interface.
Details various methods for user authentication and login.
Procedures for changing default passwords and managing login security.
How to download firmware and view installed versions.
Procedures for updating CMC and chassis infrastructure firmware.
Steps for updating server iDRAC and other component firmware.
Configuring network settings, IP addresses, and DNS via web or RACADM.
Configuring slot names and iDRAC network settings for servers.
Adding local users and integrating with Active Directory for authentication.
Explains redundancy policies (Grid, PSU) and Dynamic Power Supply Engagement.
Resetting administrative password and collecting system data using RACDUMP.
Diagnosing power issues and interpreting event logs.
General| Max Compute Nodes | 4 |
|---|---|
| RAID Levels | 0, 1, 5, 6, 10, 50, 60 |
| Supported Drives | SAS, SATA, SSD |
| Storage Capacity | Up to 12 x 3.5" HDDs or up to 25 x 2.5" HDDs/SSDs |
| Networking | 1GbE and 10GbE options |
| Management | iDRAC with Lifecycle Controller |
| Storage Controllers | Dell PERC8 |
| Cache Memory | 2GB |
| Drive Support | 2.5" or 3.5" hot-plug drives |
| Host Interface | SAS |
| Chassis Management | CMC (Chassis Management Controller) |
To Next Page
