Dell EMC PowerEdge VRTX - Viewing and Ending CMC Sessions; Viewing and Ending CMC Sessions Using Web Interface; Viewing and Ending CMC Sessions Using RACADM

Example of an XML le is as follows:
<SystemConfiguration Model="PowerEdge M1000e
"ServiceTag="NOBLE13"
TimeStamp="Tue Apr 7 14:17:48 2015" ExportMode="2">
<!--Export type is Replace-->
<!--Exported configuration may contain commented attributes. Attributes may be commented
due to dependency,
destructive nature, preserving server identity or for security reasons.-->
<Component FQDD="CMC.Integrated.1">
<Attribute Name="ChassisInfo.1#AssetTag">00000</Attribute>
<Attribute Name="ChassisLocation.1#DataCenterName"></Attribute>
<Attribute Name="ChassisLocation.1#AisleName"></Attribute>
<Attribute Name="ChassisLocation.1#RackName"></Attribute>
….
</Component>
</SystemConfiguration>
Viewing and Ending CMC Sessions
You can view the number of users currently logged in to iDRAC7 and end the user sessions.
NOTE: To end a session, you must have Chassis Conguration Administrator privilege.
Viewing and Ending CMC Sessions Using Web Interface
To view or end a session using the web interface:
1. In the left pane, go to Chassis Overview and click Network → Sessions.
The Sessions page displays the session ID, username, IP address, and session type. For more information about these
properties, see the Online Help.
2. To end the session, click Terminate for a session.
Viewing and Ending CMC Sessions Using RACADM
You must have administrator privileges to end CMC sessions using RACADM.
To view the current user sessions, use the getssninfo command.
To end a user session, use the closessn command.
For more information about these commands, see the Chassis Management Controller for PowerEdge VRTX RACADM Command
Line Reference Guide available at dell.com/support/manuals.
90