Dell EMC PowerEdge VRTX - Viewing Advanced WWN or MAC Address Information Using Web Interface; Viewing WWN or MAC Address Information Using RACADM

9. From the Partition Status drop-down menu, select the status of the partitions to display servers with the selected partition
status.
For information about the elds, see the Online Help.
Viewing Advanced WWN or MAC Address Information Using Web
Interface
To view WWN/MAC Address Information for each server slot or all servers in a chassis, in the advanced mode:
1. Click Server Overview → Properties → WWN/MAC
The WWN/MAC Summary page displays the WWN/MAC Address Information.
2. From the View drop-down menu, select Advanced, to view the WWN/MAC Addresses attributes in detailed view.
In the WWN/MAC Addresses table displays Server Slot, Fabric, Protocol, WWN/MAC addresses, Partition Status, and the
MAC address assignment type — Server assigned, FlexAddress, or I/O Identity MAC. A black check mark indicates the active
address type, either server-assigned, chassis-assigned, or remote assigned. MAC.
3. In the WWN/MAC Addresses table, click Export to save the WWN/MAC addresses locally.
4. Click the against a slot or click Expand/Collapse All to expand or collapse the attributes listed for a specic slot or all the
slots in the WWN/MAC Addresses table.
5. From the Server Slot drop-down menu, select All Servers or a specic Slot to view the WWN/MAC Addresses attributes for all
servers or servers in specic slots only respectively.
6. From the Fabric drop-down menu, select one of the fabric types to view details for all or specic type of management or I/O
fabric associated with the servers.
7. From the Protocol drop-down menu, select All Protocols or one of the listed network protocols to view all the MACS or the
MACs associated with the selected protocol.
8. In the WWN/MAC Addresses eld, enter the MAC address to view only the slots associated with the specic MAC address.
9. From the Partition Status drop-down menu, select the status of the partitions to display servers with the selected partition
status.
If a particular partition is disabled, the status is displayed as Disabled and the row displaying the partition is greyed out.
For information about the elds, see the Online Help.
Viewing WWN or MAC Address Information Using RACADM
To view WWN/MAC address information for all servers or specic servers using RACADM, use the getflexaddr and
getmacaddress subcommands.
To display Flexaddress for the entire chassis, use the following RACADM command:
racadm getflexaddr
To display Flexaddress status for a particular slot, use the following RACADM command:
racadm getflexaddr [-i <slot#>]
where <slot #> is a value from 1 to 4.
To display the NDC or LOM MAC address, use the following RACADM command:
racadm getmacaddress
To display the MAC address for chassis, use the following RACADM command:
racadm getmacaddress -m chassis
To display the iSCSI MAC addresses for all servers, use the following RACADM command:
racadm getmacaddress -t iscsi
To display the iSCSI MAC for a specic server, use the following RACADM command:
racadm getmacaddress [-m <module> [-x]] [-t iscsi]
148