Dell EMC PowerEdge VRTX - Exporting Chassis Configuration Profiles; Importing Chassis Configuration Profiles; Parsing Rules

Exporting Chassis Conguration proles
You can export chassis conguration proles to network share by using the get command.
1. To export the chassis conguration proles as clone.xml le to CIFS network share by using get command, type the following:
racadm get –f clone.xml –t xml –l //xx.xx.xx.xx/PATH –u USERNAME –p PASSWORDCMC
2. To export the chassis conguration proles as clone.xml le to NFS network share by using get command, type the following:
racadm get –f clone.xml –t xml –l xx.xx.xx.xx:/PATH
You can export chassis conguration proles to network share through a remote RACADM interface.
1. To export the chassis conguration proles as clone.xml le to CIFS network share, type the following:
racadm –r xx.xx.xx.xx –u USERNAMECMC –p PASSWORDCMC get –f clone.xml –t xml –l //
xx.xx.xx.xx/PATH –u USERNAME –p PASSWORD
2. To export the chassis conguration proles as clone.xml le to NFS network share, type the following:
racadm –r xx.xx.xx.xx –u USERNAMECMC –p PASSWORDCMC get –f clone.xml –t xml –l
xx.xx.xx.xx:/PATH
you can export chassis conguration proles to local management station through remote RACADM interface.
1. To export the chassis conguration proles as clone.xml le, type the following:
racadm –r xx.xx.xx.xx –u USERNAMECMC –p PASSWORDCMC get –f clone.xml –t xml
Importing Chassis Conguration proles
You can import chassis conguration proles from network share to another chassis by using the set command.
1. To import the chassis conguration proles from CIFS network share, type the following:
racadm set –f clone.xml –t xml –l //xx.xx.xx.xx/PATH –u USERNAME –p PASSWORDCMC
2. To import the chassis conguration proles from NFS network share, type the following:
racadm set –f clone.xml –t xml –l xx.xx.xx.xx:/PATH
You can import chassis conguration proles from network share through remote RACADM interface.
1. To import the chassis conguration proles from CIFS network share, type the following:
racadm –r xx.xx.xx.xx –u USERNAMECMC –p PASSWORDCMC set –f clone.xml –t xml –l //
xx.xx.xx.xx/PATH –u USERNAME –p PASSWORD
2. To import the chassis conguration proles from NFS network share, type the following:
racadm –r xx.xx.xx.xx –u USERNAMECMC –p PASSWORDCMC set –f clone.xml –t xml –l
xx.xx.xx.xx:/PATH
You can import chassis conguration proles from local management station through remote RACADM interface.
1. To export the chassis conguration proles as clone.xml le, type the following:
racadm –r xx.xx.xx.xx –u USERNAMECMC –p PASSWORDCMC set –f clone.xml –t xml
Parsing Rules
You can manually edit properties of an exported XML le of chassis conguration proles.
An XML le contains the following properties:
• System Conguration, which is the parent node.
• component, which is the primary child node.
• Attributes, which contains name and value. You can edit these elds. For example, you can edit the Asset Tag value as follows:
<Attribute Name="ChassisInfo.1#AssetTag">xxxxxx</Attribute>
89