Dell IN2010N - Physical Characteristics


Electrical

Physical Characteristics

VGA, 720 x 400
31.469
70.087
28.3
-/+
VGA, 640 x 480
31.469
59.940
25.2
-/-
VGA, 640 x 480
37.500
75.000
31.5
-/-
VESA, 800 x 600
37.879
60.317
40.0
+/+
VESA, 800 x 600
46.875
75.000
49.5
+/+
VESA, 1024 x 768
48.363
60.004
65.0
-/-
VESA, 1024 x 768
60.023
75.029
78.8
+/+
VESA. 1152 x 864
67.500
75.000
108.0
+/+
VESA, 1280 x 1024
64.000
60.000
108.0
+/+
VESA, 1280 x 1024
79.976
75.025
135.0
+/+
CVT, 1600 x 900 - Analog & Digital
55.540
60.000
97.75
+/-
Video input signals
Analog RGB, 0.7 Volts +/- 5%, positive polarity at 75 ohm input
impedance
Synchronization input signals
Separate horizontal and vertical synchronizations, polarity-free
TTL level, SOG (Composite SYNC on green)
AC input voltage/frequency/current
100 to 240 VAC/50 or 60 Hz + 3 Hz/2.0A (Max.)
Inrush iso surge current
120 V: 30 A (Max.)
240 V: 60 A (Max.)
Connector type
l D-sub: blue connector
Signal cable type
l D-sub: Detachable, Analog, 15 pin, shipped attached to
the monitor
Dimensions (with stand)
Height
361.8 mm (14.25 inches)
Width
486.2 mm (19.14 inches)
Depth
219.6 mm (8.65 inches)
Dimensions (without stand)
Height
292.9 mm (11.53 inches)
Width
486.2 mm (19.14 inches)
Depth
59.7 mm (2.35 inches)
Stand dimensions
Height
138.7 mm (5.46 inches)
Width
219.6 mm (8.65 inches)
Depth
219.6 mm (8.65 inches)
Weight
Weight with packaging
5.79 kg (12.75 lb)
Weight with stand assembly and cables
4.638kg(10.21 lb)
Weight without stand assembly
(for wall mount or VESA mount considerations -
no cables)
4.14 kg (9.12 lb)
Weight of stand assembly
0.358 kg (0.79 lb)