Dell Inspiron 11 3000 Series - Page 34

4 Replace the screw that secures the eMMC card to the hard-drive
assembly.
1 eMMC card 2 screw
3 notch 4 tab
5 eMMC-card slot 6 Aluminium foil tape
7 hard-drive assembly
5 Align the screw holes on the hard-drive assembly with the screw holes
on the palm rest and keyboard assembly.
6 Replace the screws that secure the hard-drive assembly to the palm rest
and keyboard assembly.
7 Adhere the tape that secures the hard-drive assembly to the palm rest
and keyboard assembly.
8 Adhere the tape that secures the hard-drive assembly to the system
board.
9 Connect the hard-drive cable to the system board.
34