Replacing the eMMC card
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1 Align the notch on the eMMC card with the tab on the eMMC-card slot
2 Insert the eMMC card at an angle into the eMMC-card slot.
3 Align the screw hole on the eMMC card with the screw hole on the hard-
drive assembly.
33
To Next Page
Loading...
