Replacing the speakers
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at dell.com/
regulatory_compliance.
Procedure
1 Using the alignment posts on the computer base, place the speakers on the
computer base.
2 Route the speaker cable through the routing guides on the computer base.
3 Adhere the tapes that secure the speaker cable to the computer base.
4 Route the power and volume-buttons board cable through the routing guides on
the speaker.
5 Connect the speaker cable to the system board.
Post-requisites
1 Replace the battery.
2 Replace the base cover.
43
To Next Page
Loading...
