Dell Inspiron 13 - Replacing the Power-Adapter Port; Procedure; Post-requisites

Replacing the power-adapter
port
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at dell.com/
regulatory_compliance.
Procedure
1 Place the power-adapter port into the slot on the computer base.
2 Align the screw hole on the power-adapter port with the screw hole on the
computer base.
3 Connect the power-adapter port cable to the system board.
Post-requisites
1 Replace the battery.
2 Replace the base cover.
61