Removing the Camera
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer. After working inside your
computer, follow the instructions in After Working Inside Your
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Prerequisites
1 Remove the battery.
2 Remove the base cover.
3 Remove the optical drive.
4 Remove the keyboard.
5 Remove the palm rest.
6 Remove the display assembly.
7 Remove the display bezel.
8 Remove the display panel.
Procedure
1 Peel off the camera cable from the display back-cover.
2 Using a plastic scribe, gently pry the camera from the display back-cover
and turn it over.
3 Peel off the tape that secures the camera cable to the camera.
82
To Next Page
Loading...
