Steps
1. Disconnect the speaker cable and display cable from the respective connectors on the system board.
2. Unroute the wireless-antenna cable from the routing guides on the palm-rest and keyboard assembly.
3. Remove the four screws (M2.5x5) that secure the display hinges to the palm-rest and keyboard assembly.
4. Using a plastic scribe, lift the left and right hinges away from the palm-rest and keyboard assembly.
5. Lift the palm-rest and keyboard assembly at an angle to free it from the hinges and remove it from the display assembly.
Removing and installing Field Replaceable Units (FRUs)
75
To Next Page
Loading...
