2. Install the display hinge caps.
3. Install the display assembly.
4. Install the wireless card.
5. Install the base cover.
6. Follow the procedure in After working inside your computer.
Display panel
Removing the display panel
CAUTION: The information in this section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
3. Remove the wireless card.
4. Remove the display assembly.
5. Remove the display hinge caps.
6. Remove the display bezel.
7. Remove the display hinges.
About this task
The following images indicate the location of the display panel and provide a visual representation of the removal procedure.
88
Removing and installing Field Replaceable Units (FRUs)
To Next Page
Loading...
