Removing the Optical-Drive
Filler
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer. After working inside your
computer, follow the instructions in After Working Inside Your
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Prerequisites
Remove the battery.
Procedure
1 Remove the screw that secures the optical-drive filler to the computer
base.
2 Using your fingertips, slide the optical-drive filler out of the optical-drive
filler bay.
1 optical-drive filler 2 screw
17
To Next Page
Loading...
