Replacing the Camera
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer. After working inside your
computer, follow the instructions in After Working Inside Your
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1 Slide the camera under the tab on the display back-cover and adhere the
camera module to the display back-cover.
2 Connect the camera cable to the camera module.
3 Replace the screw that secures the camera module to the display back-
cover.
4 Gently place the display panel on the display back-cover.
5 Align the screw holes on the display panel with the screw holes on the
display back-cover.
6 Replace the screws that secure the display panel to the display back-
cover.
Post-requisites
1 Replace the display bezel.
2 Replace the display assembly.
3 Replace the palm rest.
4 Replace the keyboard.
5 Replace the optical-drive filler.
6 Replace the base cover.
7 Replace the battery.
77
To Next Page
Loading...
