Dell Inspiron 3482 - Base Cover Service; Removing and Replacing the Base Cover

Removing the base cover
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Procedure
1 Loosen the three captive screws on the base cover.
2 Remove the six screws (M2.5x4) that secure the base cover to the palm-rest and keyboard assembly.
3 Pry the base cover from the top-right corner of the palm-rest and keyboard assembly.
4 Lift the base cover o the palm-rest and keyboard assembly from the right side of the base cover.
6
16 Removing the base cover