Dell Inspiron 3482 - Replacing the Power-Button Board; Procedure; Post-Requisites

Replacing the power-button board
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Procedure
1 Place the power-button board into the slot on the palm rest and keyboard assembly.
2 Replace the two screws (M2x3) that secure the power-button board to the palm rest and keyboard assembly.
3 Slide the power-button cable to the system board and close the latch to secure the cable.
Post-requisites
1 Replace the display assembly.
2 Replace the hard drive.
3 Replace the thermal plate.
4 Replace the wireless card.
5 Replace the battery.
6 Replace the base cover.
31
60 Replacing the power-button board