Replacing the display bezel
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Procedure
1 Align the display bezel with the display back-cover and antenna assembly, and then gently snap the display bezel into place.
2 Insert the tabs on the display-hinge cover to the slots on the display back-cover and antenna assembly.
3 Snap the display-hinge cover into place.
41
Replacing the display bezel 79
To Next Page
Loading...
