Removing the display cable
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Prerequisites
1 Remove the base cover.
2 Remove the thermal plate.
3 Remove the wireless card.
4 Remove the display assembly.
5 Remove the display bezel.
6 Remove the camera.
7 Remove the display panel.
8 Remove the display hinges.
Procedure
1 Remove the camera cable and the display cable from the routing guides on the display back-cover and antenna assembly.
2 Lift the camera cable and the display cable o the display back-cover and antenna assembly.
48
90 Removing the display cable