Replacing the graphics card
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1 Align the graphics card with the slot on the system board.
2 Place the card in the slot and press it down firmly until it snaps into place.
Ensure that the card is firmly seated in the slot.
3 Rotate the card retention bracket towards the computer until it snaps
into place.
4 Close the side-chassis.
Post-requisites
1 Replace the front bezel.
2 Replace the computer cover.
30
To Next Page
Loading...
