Replacing the power-button
module
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1 Slide the power button into its socket.
2 Connect the power-button cable to the system board.
3 Close the side-chassis.
Post-requisites
1 Replace the front bezel.
2 Replace the computer cover.
63
To Next Page
Loading...
