Replacing the chassis fan
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1 Align the screw holes on the chassis fan with the screw holes on the
chassis.
2 Replace the screws that secure the chassis fan to the chassis.
3 Connect the chassis fan cable to the system board.
4 Close the side-chassis.
5 Place the computer in an upright position.
Post-requisites
1 Replace the front bezel.
2 Replace the computer cover.
67
To Next Page
Loading...
