Replacing the 2.5-inch hard
drives
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
NOTE: When replacing the hard drive, follow the orientation of the hard
drive when it was removed.
1 Align the holes on the hard drive to the tabs on the hard-drive bracket.
2 Snap the hard drive into the hard-drive bracket.
3 Slide the hard-drive assembly into the side-chassis.
4 Connect the data cable and power cable to the hard drive.
5 Close the side-chassis.
Post-requisites
1 Replace the front bezel.
2 Replace the computer cover.
40
To Next Page
Loading...
