Replacing the processor fan
and heat-sink assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1 Place the processor fan and heat-sink assembly over the processor.
2 Replace the screws that secure the processor fan and heat-sink assembly
with the screw holes on the system board.
3 Connect the processor-fan cable to the system board.
4 Close the side-chassis.
Post-requisites
1 Replace the front bezel.
2 Replace the computer cover.
76
To Next Page
Loading...
