Replacing the 3.5-inch hard
drive
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1 Place the hard drive in the hard-drive bracket.
2 Align the screw holes on the hard drive with the screw holes on the hard-
drive bracket.
3 Replace the screws that secure the hard-drive bracket to the hard drive.
4 Slide the hard-drive assembly into the side-chassis.
5 Connect the data cable and the power cable to the hard drive.
6 Close the side-chassis.
7 Replace the screw that secures the hard-drive assembly to the side-
chassis.
Post-requisites
1 Replace the front bezel.
2 Replace the computer cover.
35
To Next Page
Loading...
