Identifier GUID-AAC0DC5A-1680-492D-804F-52F812D409C2
Status Released
Removing the memory modules
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-0C370AA3-39CD-418F-B0C0-9747ADD48E61
Status Released
Prerequisites
Remove the base cover.
Identifier GUID-BEF12B85-14DA-4A57-BA9A-407178F5E85A
Status Released
Procedure
1 Locate the memory module on the system board and lift the mylar that covers the memory modules.
2 Use your ngertips to carefully spread apart the securing-clips on each end of the memory-module slot until the memory module pops
up.
3 Remove the memory module from the memory-module slot.
12
24 Removing the memory modules
To Next Page
Loading...
