Identifier GUID-DC61C8F1-86D0-49DE-B8D8-229750E714D6
Status Released
Removing the I/O board
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-0C370AA3-39CD-418F-B0C0-9747ADD48E61
Status Released
Prerequisites
Remove the base cover.
Identifier GUID-18B0466B-66B7-4FA0-B52B-5072418C7CA8
Status Released
Procedure
1 Peel o the tape that secures the I/O-board cable to the I/O board.
2 Open the latch, and disconnect the I/O-board cable from the I/O board.
3 Disconnect the ngerprint-reader board cable from the I/O board.
4 Remove the two screws (M2x3) that secure the I/O board to the palm-rest and keyboard assembly.
5 Lift the I/O board o the palm-rest and keyboard assembly.
24
Removing the I/O board 43
To Next Page
Loading...
