Identifier GUID-AB1F153B-621B-42FC-89BE-0E1105FF1786
Status Released
Removing the display assembly
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-F1FE6F5E-F0BA-474E-9DE4-51B339F81D20
Status Released
Prerequisites
1 Remove the base cover.
2 Remove the wireless card.
Identifier GUID-E66EFBCB-06E8-47A1-93AA-A4E9B422F375
Status Released
Procedure
1 Peel o the tape that secures the fan cable to the system board.
2 Disconnect the fan cable from the system board.
3 Open the latch, and disconnect the I/O cable from the system board.
4 Peel o the tape that secures the touchscreen cable and the display cable to their respective connectors on the system board.
5 Open the latch, and disconnect the touchscreen cable from the system board.
6 Open the latch, and disconnect the display cable from the system board.
30
Removing the display assembly 51
To Next Page
Loading...
