Dell Inspiron 5482 - 32 Removing the Power Button with Fingerprint Reader; Prerequisites; Procedure

Identifier GUID-43423BFB-7BAA-4C7E-BA7A-12118E225EBA
Status Released
Removing the power button with ngerprint
reader
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
NOTE: Applicable only for computers that are shipped with ngerprint reader.
Identifier GUID-B2A7A97E-62A3-40B0-A45E-C3B93E09A4B5
Status Released
Prerequisites
1 Remove the base cover.
2 Remove the I/O board.
3 Remove the wireless card.
4 Remove the display assembly.
Identifier GUID-1463FCF5-D9A3-41FE-9ED3-177F4F749155
Status Released
Procedure
1 Remove the two screws (M2x3) that secure the power button with ngerprint reader from the palm-rest and keyboard assembly.
2 Open the latch, and disconnect the power button with ngerprint reader cable from the power button with ngerprint reader cable
connector.
3 Peel o the power button with ngerprint reader from the palm-rest and keyboard assembly.
32
Removing the power button with ngerprint reader 55