Identifier GUID-4AF7A7F4-79DC-43F4-A4DF-63362F890FB6
Status Released
Removing the wireless card
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-0C370AA3-39CD-418F-B0C0-9747ADD48E61
Status Released
Prerequisites
Remove the base cover.
Identifier GUID-357702E7-FE35-4F25-83B9-AEBB8715B8C4
Status Released
Procedure
1 Locate the wireless card on the system board.
2 Remove the screw (M2x3) that secures the wireless-card bracket and wireless card to the system board.
3 Lift the wireless-card bracket o the wireless card.
4 Disconnect the antenna cables from the wireless card.
5 Slide and remove the wireless card from the wireless-card slot.
28
Removing the wireless card 47
To Next Page
Loading...
