Identifier GUID-2596AFC0-F1E8-4A0E-A603-7D2CFE582ECE
Status Released
Replacing the fan
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-151D28A9-0BA1-4AA0-8D3D-D950B9945E74
Status Released
Procedure
1 Align the screw holes on the fan with the screw holes on the palm-rest and keyboard assembly.
2 Replace the two screws (M2x3) securing the fan to the palm-rest and keyboard assembly.
3 Adhere the tape that secures the I/O-board cable to the fan.
4 Connect the fan cable to the system board.
5 Adhere the tape that secures the fan cable to the system board.
Identifier GUID-EE31644C-8CF0-4069-89C9-C081096D205E
Status Released
Post-requisites
Replace the base cover.
21
40 Replacing the fan
To Next Page
Loading...
