Steps
1. Align the notch on the 2280 solid-state drive with the tab on M.2 slot one on the system board.
2. Slide the 2280 solid-state drive into M.2 slot one on the system board.
3. Replace the screw (M2x3) that secures the 2280 solid-state drive to the palm-rest and keyboard assembly.
Next steps
1. Install the base cover.
2. Follow the procedure in After working inside your computer.
Installing the solid-state drive mounting bracket on M.2
slot one
About this task
The following image provides a visual representation of the procedure to install the solid-state drive mounting bracket when replacing M.2
2230 solid-state drive with M.2 2280 solid-state drive in M.2 slot one.
The following image provides a visual representation of the procedure to install the solid-state drive mounting bracket when replacing M.2
2280 solid-state drive with M.2 2230 solid-state drive in M.2 slot one.
26
Removing and installing components
To Next Page
Loading...
