Steps
1. Align the notches on the solid-state drive with the tabs in the M.2 slot two on the system board.
2. Slide the solid-state drive into the M.2 slot two on the system board.
3. Replace the screw (M2x3) that secures the solid-state drive to the palm-rest and keyboard assembly.
Next steps
1. Install the base cover.
2. Follow the procedure in After working inside your computer.
Installing the solid-state drive mounting bracket on M.2
slot two
About this task
The figure provides a visual representation of the procedure to move the solid-state drive mounting bracket on M.2 slot two.
Removing and installing components
31
To Next Page
Loading...
