Flea power release
About this task
Flea power is the residual static electricity that remains on the computer even after it has been powered off and the battery has been
disconnected from the system board. The following procedure provides the instructions on how to release the flea power:
Steps
1. Turn off your computer.
2. Follow the steps in Removing the base cover.
NOTE: Ensure that the battery is disconnected from the system board.
3. Press and hold the power button for 15 seconds to drain the flea power.
4. Follow the steps in Installing the base cover.
5. Turn on your computer.
Troubleshooting 67
To Next Page
Loading...
