About this task
The following image(s) indicate the location of the keyboard and provides a visual representation of the removal procedure.
Steps
1. Lift the mylar that covers one of the screws securing the keyboard to the palm-rest assembly as shown in the bubble located on the
image.
2. Remove the 29 screws (M1.2x1.5) that secure the keyboard to the palm-rest assembly.
3. Lift the keyboard off the palm-rest assembly.
Installing the keyboard
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following image(s) indicate the location of the keyboard and provides a visual representation of the installation procedure.
Removing and installing components
47
To Next Page
Loading...
