Replacing the fan
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Procedure
1 Using the alignment posts, place the fan on the palm-rest assembly.
2 Replace the two screws (M2x3) that secure the fan to the palm-rest assembly.
3 Connect the fan cable to the system board.
4 Route the I/O cable through the routing guides on the fan.
Post-requisites
Replace the base cover.
15
28 Replacing the fan
To Next Page
Loading...
