Replacing the display panel
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Procedure
1 Place the display panel on a at surface.
2 Replace the display cable.
3 Replace the camera.
4 Turn the display-panel assembly over.
5 Route the display cable through the routing guide inside the hinge cover.
6 Align the tabs on the display-panel assembly with the slots on the display back-cover and antenna assembly and gently snap the
display-panel assembly into place.
Post-requisites
1 Replace the display assembly.
2 Replace the heat sink.
3 Replace the fan.
4 Replace the wireless card.
5 Replace the base cover.
43
68 Replacing the display panel
To Next Page
Loading...
