Replacing the display cable
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Procedure
1 Adhere the display cable to the display panel.
2 Connect the touch-screen cable and close the latch to secure the cable.
3 Adhere the tape that secures the touch-screen cable to the display panel.
4 Connect the sensor cable and close the latch to secure the cable.
5 Adhere the tape that secures the sensor cable to the display panel.
6 Connect the display cable and close the latch to secure the cable.
7 Adhere the tape that secures the display cable to the display panel.
Post-requisites
1 Replace the camera.
2 Replace the display panel.
3 Replace the display assembly.
4 Replace the heat sink.
5 Replace the fan.
6 Replace the wireless card.
7 Replace the base cover.
49
74 Replacing the display cable
To Next Page
Loading...
