Removing the display back-cover and antenna
assembly
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Prerequisites
1 Remove the base cover.
2 Remove the wireless card.
3 Remove the fan.
4 Remove the heat sink.
5 Remove the display assembly.
6 Follow the procedure from step 1 to step 3 in “Removing the display panel”.
7 Remove the display hinges.
Procedure
After performing all the prerequisites, we are left with the display back-cover and antenna assembly.
50
Removing the display back-cover and antenna assembly 75
To Next Page
Loading...
