Solving Problems 37
Network Problems
Windows Error Messages
CHECK THE NETWORK CABLE CONNECTOR—Ensure that the network
cable connector is firmly connected to the connector on the computer and the
network wall jack.
CHECK THE NETWORK LIGHTS ON THE NETWORK CONNECTOR— Green
indicates that the network connection is active. If the status light is not green, try
replacing the network cable. Amber indicates that the network card driver is
loaded and the card is detecting activity.
RESTART THE COMPUTER— Try to log on to the network again.
CONTACT YOUR NETWORK ADMINISTRATOR—Verify that your network
settings are correct and that the network is functioning.
X:\ IS NOT ACCESSIBLE. THE DEVICE IS NOT READY—Insert a disk into
the drive and try again.
A FILENAME CANNOT CONTAIN ANY OF THE FOLLOWING
CHARACTERS: \ / : * ? “ < > |— Do not use these characters in
filenames.
NOT ENOUGH MEMORY OR RESOURCES. CLOSE SOME PROGRAMS AND
TRY AGAIN—You have too many programs open. Close all windows and open
the program that you want to use.
THE FILE BEING COPIED IS TOO LARGE FOR THE DESTINATION
DRIVE—The file that you are trying to copy is too large to fit on the disk, or the
disk is too full. Try copying the file to a different disk or use a larger capacity disk.
To Next Page
Loading...
