Installing keyboard
Steps
1. Hold the keyboard and route the keyboard cable through the placeholder.
2. Place the keyboard to align with the screw holders on the computer.
3. Tighten the M2*2 screws to secure the keyboard to the computer.
4. Connect the keyboard cable to the connector.
5. Install the:
a. keyboard trim
b. battery
c. base cover
6. Follow the procedure in After working inside your computer.
Heat sink
Removing heatsink
Steps
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. base cover
Removing and installing components
31
To Next Page
Loading...
