Table 13. System setup options—System Management menu
System Management
Service Tag Display the Service Tag of the system.
Asset Tag Create a system Asset Tag.
AC Behavior
Wake on AC Enable or disable the wake on AC option.
By default, the option is disabled.
Wake on LAN
Wake on LAN Enable or disable the system to power on by special LAN signals when it
receives a wakeup signal from the WLAN.
By default, the Disabled option is selected.
Auto on Time Enable to set the system to turn on automatically every day or on a preselected
date and time. This option can be configured only if the Auto On Time is set to
Everyday, Weekdays, or Selected Days.
By default, the option is disabled.
Intel AMT Capability
Enable Intel AMT Capability By default Restrict MEBx Access option is enabled.
MEBx Hotkey
Enable MEBx Hotkey When enabled, this allows the use of Ctrl+P hotkey to access MEBx.
By default OFF option is disabled.
USB Provision
Enable USB Provision Intel AMT can be provisioned using the local provisioning file using a USB
storage device.
By default OFF option is disabled.
Table 14. System setup options—Keyboard menu
Keyboard
Fn Lock Options By default, the Fn lock option is enabled.
Keyboard Illumination Enables to change the keyboard illumination settings.
By default, the Disabled option is enabled.
Keyboard Backlight Timeout on AC Set the timeout value for the keyboard backlight when an AC adapter is
connected to the system.
By default, the 10 seconds option is enabled.
Keyboard Backlight Timeout on
Battery
Set the timeout value for the keyboard backlight when the is running only on
battery power.
By default, the 10 seconds option is enabled.
Device Configuration Hotkey Access Manages whether you can access device configuration screens through
hotkeys during system startup.
By default, the option is enabled.
Table 15. System setup options—Pre-boot Behavior menu
Pre-boot Behavior
Adapter Warnings
70 BIOS setup
To Next Page
Loading...
