2
Removing and installing components
This section provides detailed information on how to remove or install the components from your
computer.
Recommended tools
The procedures in this document require the following tools:
• Small flat blade screwdriver
• Phillips screwdriver
• Small plastic scribe
Installing the micro Subscriber Identification Module
(SIM) card
1. Follow the procedure in Before working inside your computer.
2. Insert a paperclip or a SIM card removal tool into the pinhole to remove the SIM card tray [1].
3. Place the micro SIM card on the SIM card tray [2].
4. Push the SIM card tray into the slot until it clicks into place.
10
To Next Page
Loading...
