Installing the keyboard
1. Align the keyboard with the screw holders on the computer.
2. Tighten the screws to secure the keyboard to the computer.
3. Tighten the screw that secures the metal tab on the system board.
4. Connect the keyboard cables to the connectors on the system board.
5. Install the:
a. system board
b. display
c. SSD
d. WWAN
e. WLAN
f. coin cell
g. battery
h. base cover
6. Follow the procedure in After working inside your system.
Removing the palmrest
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. base cover
b. battery
c. SSD
d. WWAN card
e. WLAN card
f. coin-cell
g. smart-card cage
h. speakers
28
To Next Page
Loading...
