Dell Latitude 9450 2-in-1 - Fan; Removing the Right Fan

Figure 23. Installing the base cover
Steps
1. Align and place the base cover on the palm-rest and keyboard assembly, and snap the base cover into place.
2. Tighten the six captive screws to secure the base cover to the system.
Next steps
1. Install the nanoSIM-card tray.
2. Follow the procedure in after working inside your computer.
Fan
Removing the right fan
Prerequisites
1. Follow the procedure in Before working inside your computer.
NOTE:
Ensure that your computer is in Service Mode. For more information, see step 6 in Before working inside your
computer.
2. Remove the Nano-SIM card tray.
3. Remove the base cover.
Removing and installing Customer Replaceable Units (CRUs)
45