CAUTION: Ensure that your computer is in Service Mode. For more information, see step 6 in before working
inside your computer.
2. Remove the Nano-SIM card tray.
3. Remove the base cover.
About this task
The following images indicate the location of the WWAN card and provide a visual representation of the removal procedure.
Figure 31. Removing the WWAN card
Steps
1. Using a plastic scribe, pry open the WWAN card shielding cover from the right edge of the WWAN card shielding cover.
52
Removing and installing Customer Replaceable Units (CRUs)
To Next Page
Loading...
