Dell Latitude 9450 2-in-1 - Page 83

Figure 66. Installing the right-speaker
Steps
1. Align and place the right-speaker into the slot on the chassis.
2. Replace the two (M1.6x1.8) screws to secure the right-speaker to the system.
3. Connect the right-speaker cable to connector (SPKL) on the system board.
4. Adhere the tape to secure the right-speaker cable to the palm-rest assembly.
When installing the right-speaker, secure the speaker cables in place with pieces of tape adhered to the palm rest.
Figure 67. Speaker cable tape
Removing and installing Field Replaceable Units (FRUs)
83