Table 29. System Setup options—Integrated Devices menu(continued)
Integrated Devices
By default, all the options are enabled.
Enable Microphone Enables the microphone.
By default, the Enable Microphone option is enabled.
NOTE: Depending on the configuration ordered, the microphone setup option
may not be available.
Enable Internal Speaker Enables the internal speaker.
By default, the Enable Internal Speaker option is enabled.
USB/Thunderbolt Configuration
Enable USB Boot Support Enables booting from USB mass storage devices that are connected to external
USB ports.
By default, the Enable USB Boot Support option is enabled.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
Enable External USB Ports Enables the external USB ports.
By default, the Enable External USB Ports option is enabled.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
Enable Thunderbolt Technology
Support
Enable Thunderbolt Technology Support Enables the associated ports and adapters for Thunderbolt Technology support.
By default, the Enable Thunderbolt Technology Support option is enabled.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
Enable Thunderbolt Boot Support
Enable Thunderbolt Boot Support Enables the Thunderbolt adapter-peripheral device and USB devices that are
connected to the Thunderbolt adapter to be used during BIOS Preboot.
By default, the Enable Thunderbolt Boot Support option is disabled.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
Enable Thunderbolt (and PCIe behind
TBT) pre-boot modules
Enables the PCIe devices that are connected through a Thunderbolt adapter to
run the PCIe devices UEFI Option ROM (if present) during preboot.
By default, the Enable Thunderbolt (and PCIe behind TBT) pre-boot
modules option is disabled.
NOTE: To view this option, enable Advanced Setup mode as described in
View Advanced Setup options.
Disable USB4 PCIE Tunneling Disables the USB4 PCIE Tunneling option.
By default, the Disable USB4 PCIE Tunneling option is disabled.
NOTE: To view this option, enable Advanced Setup mode as described in
Entering BIOS Setup program.
Video/Power only on Type-C Ports Enables or disables the Type-C port functionality to video or only power.
By default, the Video/Power only on Type-C Ports option is disabled.
BIOS Setup 93
To Next Page
Loading...
